Chloromax CCS142D Digital disinfection sensor

Chloromax CCS142D Digital disinfection sensor
  • 437056

Memosens sensor for drinking water and process applications

Chloromax CCS142D is the digital free chlorine sensor for all kinds of water. It measures reliably even if fluctuations in flow or conductivity occur and enables control of the disinfection loop so that the water is free of germs. The sensor offers low maintenance saving you time. Thanks to Memosens digital technology, CCS142Dcombines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and simplifies predictive maintenance.


  • Long calibration and maintenance intervals
  • Easy membrane replacement thanks to prefabricated membrane cap
  • Zero-point calibration not required. No complex installation of an activated carbon filter, as found with open chlorine sensor
  • No change in measured value in the event of fluctuations in conductivity
  • Measurement practically independent of the flow at flow velocities above 15 cm/s (immersion) or 30 l/h (CCA250)
  • Maximum process safety through no-contact inductive signal transmission
  • Easy handling due to storage of sensor-specific data

Field of application

Oxidants such as chlorine or inorganic chlorine compounds are used to disinfect water. They must be dosed immediately, depending on the operating conditions. If the concentrations are too low, this could jeopardize the disinfection process. On the other hand, concentrations which are too high can cause corrosion, skin irritation and affect the taste of the water.

The CCS142D chlorine sensor measures free chlorine in the following areas:

  • Drinking water
  • Process water
  • Industrial water treatment

Need Help? Contact Us Leave Feedback

Category: .